In the use of pressure riveting studs, although the installation and methods and principles have been determined, the pressure riveting studs still require special riveting and pressing equipment to operate, which also ensures that the pressure riveting studs can maintain stable work after the installation is completed An indispensable factor for performance. During the installation, the heads of the riveting press and the riveting studs should be vertically balanced and pressed down evenly.
When selecting a nut column, the thickness of the plate used must be based on the exact size range. The hardness of the low-carbon steel plate must be less than 70RB, and the hardness of the stainless steel plate must be less than 80RB.
The surface of the free-cutting iron is processed, and the stainless steel maintains the original color. The user can order according to the model specifications in the table as required, or special order can be made as required. The hole size of the plate must be processed according to the tolerance size of 0-+0.075mm, and it is recommended to punch. The installation must be carried out by "pressing riveting", and it must not be knocked in.
When stainless steel is used, the tail number is marked with "S". The end face of the nut column is straight tooth, which is indicated by "C". The length of the through-hole nut column is less than 10mm, all are full wire, and the hole can be enlarged at the hexagonal end surface (type I) or round end surface (type II) at more than 10mm.
For exclusive deals and latest offers, sign up by entering your email address below.