The difference between flange nuts and ordinary nuts

Home / News / Industry News / The difference between flange nuts and ordinary nuts

The size of flange nut and general hex nut is basically the same as the thread specification, but compared to hex nut, it is a one-piece gasket and nut, and there are anti-skid teeth underneath, which increases the nut and workpiece Compared with the combination of ordinary nut and washer, it is stronger and more tensile. The surface contact area of ​​the flange nut and the connecting piece is large, which determines its use. When the two parts connected by the bolt and nut are connected for convenience, the bolt hole of one part is usually processed very large, so that the two parts It will be very convenient when aligning. The two holes do not need to be accurate to realize the bolt connection. If the bolt hole is enlarged, it will inevitably lead to the reduction of the contact area between the ordinary nut and the connected part, so this flange surface is used. Nuts can avoid this situation. There are grooves on the flange surface of the nut flange, which not only increases the contact area, but also prevents loosening, which is common in rotating mechanisms.
The size of flange nut and general hex nut is basically the same as the thread specification, but compared to hex nut, it is a one-piece gasket and nut, and there are anti-skid teeth underneath, which increases the nut and workpiece Compared with the combination of ordinary nut and washer, it is stronger and more tensile.
The surface contact area of ​​the flange nut and the connecting piece is large, which determines its use. When the two parts connected by the bolt and nut are connected for convenience, the bolt hole of one part is usually processed very large, so that the two parts It will be very convenient when aligning. The two holes do not need to be accurate to realize the bolt connection. If the bolt hole is enlarged, it will inevitably lead to the reduction of the contact area between the ordinary nut and the connected part, so this flange surface is used. Nuts can avoid this situation.
There are grooves on the flange surface of the nut flange, which not only increases the contact area, but also prevents loosening, which is common in rotating mechanisms.

www.jinduhardware.com

Be the First to Know

For exclusive deals and latest offers, sign up by entering your email address below.