News

What are the materials of the lock nut

Update:12-08-2020
Summary:

At present, the lock nuts on the market are mainly made […]

At present, the lock nuts on the market are mainly made of carbon steel, stainless steel and copper.
(1) Carbon steel. We distinguish low-carbon steel, medium-carbon steel, high-carbon steel and alloy steel based on the carbon content of carbon steel materials.
1. Low carbon steel C%≤0.25% is usually called A3 steel in China. It is basically called 1008, 1015, 1018, 1022, etc. abroad. Mainly used for grade 4.8 bolts, grade 4 nuts, small screws and other products without hardness requirements. (Note: 1022 material is mainly used for drill tail screws.)
2. Medium carbon steel 0.25%<c%≤0.45% It is usually called No. 35 and No. 45 steel in China, and basically called 1035, ch38f, 1039, 40acr, etc. abroad. Mainly used for grade 8 nuts, grade 8.8 bolts and grade 8.8 inner hexagon products. <="" p="" style="margin: 0px; padding: 0px;">
3. High carbon steel C%>0.45%. Currently not used in the market
4. Alloy steel: Add alloy elements to normal carbon steel to increase some special properties of steel: such as 35, 40 chromium molybdenum, SCM435, 10B38. Fangsheng screws mainly use SCM435 chromium-molybdenum alloy steel, the main components are C, Si, Mn, P, S, Cr, Mo.
(2) Stainless steel. Performance level: 45, 50, 60, 70, 80
Mainly divided into austenite (18%Cr, 8%Ni), good heat resistance, good corrosion resistance and good weldability. A1, A2, A4
Martensite and 13%Cr have poor corrosion resistance, high strength and good wear resistance. C1, C2, C4 ferritic stainless steel. 18%Cr has better upsetting and corrosion resistance than martensite. Currently imported materials on the market are mainly Japanese products. According to the level, it is mainly divided into SUS302, SUS304, and SUS316.
(3) Copper. Commonly used materials are brass...zinc-copper alloy. On the market, H62, H65, and H68 copper are mainly used as lock nuts.

www.jinduhardware.com

0